Essex Electronics K1 Series Manuál s instrukcemi stáhnout pdf (Strana 9)

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

1. Remove power.

2. Jumper the two pins above the connector labeled "CONFIG.”

3. Apply appropriate power. (You should hear 4 beeps and the

RED LED will flash and the GREEN LED will be solid).

4. Once the Keypad is in configuration mode, enter 0099#. The

Keypad will beep twice and both LEDS will flash for approxi-

mately 10 seconds. (During this time, the Keypad will appear

dead. Do NOT remove power!)

5. Once the reset is complete, you will hear 4 beeps and the RED

LED will flash and the GREEN LED will be solid.

6. Enter the configuration number followed by #.

a. Keypad Output

Keypad Output Configuration Site Code

26 Bit Wiegand (default) 1 # 000

8 Bit Word 2 #

BCD 3 #

Serial ASCII 4 #

ABA Track II Clock & Data 5 #

4 Bit Word 6 #

Keypad Reset

In certain cases you may want to erase all user codes and restore

system defaults. To perform this procedure:

CAUTION: This procedure completely erases the memory and

restores factory defaults! Once the memory is cleared, all pro-

grammed User Codes are erased and factory default settings

are restored.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Žádné komentáře

Essex Electronics K1 Series Manuál s instrukcemi Strana 9